Dwight Duncan

Everything You Need to Know Lake Fountain Pump

If you’re looking for a new fountain for your water garden, you may wonder what a lake fountain pump is. Read on to learn more about choosing a lake fountain pump and the best way to maintain it. You may also want to check the warranty of the fountain. Most manufacturers offer contracts for a specific time, but this may not be enough for you.

Flow Rate of a Lake Fountain Pump

The amount of water that flows through a lake fountain depends on its head pressure. Head pressure is the water’s elevation change from one to three feet. Each foot of tubing increases the head pressure by one foot. Pump manufacturers usually include a pressure chart on the box. It is easy to calculate the flow rate of a lake fountain pump by looking at the chart. However, you can make a few simple calculations to find the right one for your lake fountain.

The water level is critical in selecting the right pump for your fountain. First, ensure the water level is at least fifteen feet above the base level. Then choose a pump whose suction lift equals or exceeds 15 feet. Make sure to select a generously-sized pipe to reduce the effects of friction. The discharge pressure should match.

Look for GFCI protection.

GFCI protection on a lake fountain pump is essential to minimize any possible harm from ground faults. Most electrical codes require GFCI protection in outdoor applications. In addition, many fountain control panels have built-in GFCI protection. Using a GFCI on a fountain pump can be helpful if your home’s main electric panel is GFCI protected, but if it is not, you should be careful, as it may unexpectedly trip your breaker.

A GFCI will only protect you against the water-contact part of the fountain pump, but it will not protect wiring near the fountain. Therefore, if you find a GFCI, you should also look for other safety features. For example, in addition to GFCI protection, look for the breaker’s trip level. If it is higher than 5mA, you should consider a GFCI-protected model. Otherwise, you may purchase a separate unit to avoid nuisance tripping.

Consider the price of a lake fountain pump.

There are several things to consider when purchasing a lake fountain pump. A low-cost fountain pump will not last very long and will fail prematurely. The quality of the pump will also be critical. Low-cost fountain pumps will not last as long as high-quality ones, which will require constant maintenance. Moreover, they will not be suitable for ponds that collect large amounts of debris. Hence, consider the cost before buying a fountain pump.

You can get unbiased information about the quality and performance of a particular lake fountain pump from customer reviews. These reviews are written by people who have used the fountain pump to determine whether it works properly or not. Ensure the number of users increases with time, as a higher number means better quality and after-sales service. The pond should be large enough to accommodate the pump. It should also fit within your budget.

Care for a lake fountain pump

To make your fountain last, you should learn how to care for it properly. For example, while most floaters are winter hardy, you should treat them like annuals if you live in a colder climate. Also, you should remember that water plants can spread to other bodies of water and need to be disposed of properly to prevent invasive species from settling in. Fortunately, there are ways to extend the life of a mechanical pump and keep it from needing repairs.

You should use a cleaning agent specifically for fountains during the warmer months. This product effectively removes algae and white scales, typically caused by hard water and minerals in the water. However, if you have a fountain with a spongy filter, you may want to use a cleaning agent for this purpose. The cleaner should contain no harsh chemicals or bleach, so you can use it whenever you want.

Commercial Vehicle Wraps and How to Clean Them

If you are planning to get a commercial vehicle wrap for your vehicle, you may be wondering how much they cost and what they do. In this article, you will learn more about the benefits of commercial vehicle wraps, Austin area, and how to clean them. If you are still unsure about whether this option is right for you, consider contacting a local design studio. They can give you a quote for your vehicle wrap and explain the benefits of the product.

Cost of a commercial vehicle wrap

The most effective form of advertising is to have your vehicle wrapped. Wrapped vehicles can be a moving billboard generating thousands of impressions a day. With bold images and colors, people notice your vehicle and will take note of your message. These vehicles are an excellent form of vehicle advertising, and you can expect to spend anywhere from $250 to over $20,000 on the process. The cost of a commercial vehicle wrap is dependent on several factors, including the size and customization of the wrap, the condition of the vehicle, and the type of fleet you operate.

Firstly, the size of your vehicle will have a significant impact on the cost of a commercial vehicle wrap. Smaller vehicles are cheaper to wrap than large ones, so people usually choose small to midsize cars for their wraps. Large trucks are also more expensive to wrap and are therefore less cost-effective. However, if you want to cover a large truck, you can also opt for a wrap, but it will require a much larger investment.

The costs of traditional forms of advertising are also very expensive, ranging from hundreds to thousands of dollars a month. This means that many start-up businesses do not have the money to pay thousands of dollars for advertisements. But the cost of a commercial vehicle wrap should be minimal compared to the value you get from it. While a vehicle wrap might be costly, it will last from three to five years. In addition to this, a vehicle wrap will have a positive impact on the bottom line.

Benefits of a commercial vehicle wrap

One of the biggest benefits of a commercial vehicle wrap is that it can be applied to vehicles of all sizes. Vehicles can range from cars to large trucks to vans and boats. Vehicle wraps can boost brand exposure by reaching people on the road and in the neighborhood. People may notice your vehicle while driving down the street and pull out their phones to find out more about it. Additionally, vehicle wraps are a great way to advertise your business without making the vehicle stand out. Vehicles with graphics always draw attention.

The constant exposure of a vehicle wrap is great for businesses that serve in-person customers. This constant exposure to your brand gives the impression that you are a worthy company. Customers will think that you are always on the go and are in high demand, which is a big plus for your business. Vehicle wraps also allow you to increase brand awareness and sales. In addition to increasing brand awareness, a commercial vehicle wrap can be a good investment.

In addition to reaching your target market, a commercial vehicle wrap provides protection to your vehicle. The thin layer of coating helps prevent dents, door dings, and other types of damage. In addition, a vehicle wrap can reduce rust, which saves you money on paint repair or other upgrades. You can expect to see significant improvement in customer satisfaction and loyalty after getting a vehicle wrap. You can even use it to build brand loyalty among your customers.

How to clean a commercial vehicle wrap

If you are wondering how to clean a commercial vehicle wrap, follow these simple instructions to keep it looking its best. First, use a diluted solution of rubbing alcohol to remove small stains. Do not apply solvents or abrasive polishes. Also, avoid using an engine degreaser or wax products as they can damage the vinyl. If the stains cannot be removed with a simple solution, you can try a stronger one.

The cleaning solution should not remain on the vinyl graphics for more than 60 seconds. If a stain is especially hard to remove, you can use isopropyl alcohol. A pressure washer can also help remove tough stains. Make sure to use a low-pressure setting and aim the spray nozzle approximately 18 inches from the vehicle. Remember, pressure washers can damage the film, so use caution when using them.

Once you’ve completed the cleaning process, it’s time to protect your investment with a protective car cover. This will prevent the wrap from becoming damaged by acidic pollutants. For best results, it’s a good idea to apply a protective coating over the wrap before storing it in a sunny location. For outdoor storage, use a covered vehicle and avoid direct sunlight. If the weather is too harsh, consider using a cloth car cover instead.

Factors to Consider When Purchasing Home Office Furniture

Before buying home office furniture, you should consider certain factors first. These factors include the cost and flexibility, ergonomics, and psychology of color. Choosing the right home office furniture Indianapolis can make or break your productivity and satisfaction in your work. Read on to find out more! Here are the most important factors to consider when purchasing home office furniture:


A home office should be flexible. If you are not working, you can easily turn it into another room for your family. You can even use it for music recording if you love that. In addition to your workspace, you also need basic home office furniture that can be used for other purposes when you’re not working. For this reason, you need to consider the types of flexible home office furniture you need. This way, you won’t have to worry about buying everything at once.

Purchasing home office furniture with a little bit of flexibility allows you to change the style of your office and fit it to your needs. For instance, you can swap the standard office furniture like the desk and chair for a more aesthetically pleasing one. Instead of the traditional beige walls with drab paper memos, you can opt for a vibrant painting or a lovely potted plant. You can also replace the traditional office furniture with a more design-forward option.


Adding home office furniture to your home can be a major investment. The right furniture will boost your productivity. Whether you prefer to sit down or stand up, a comfortable workspace is essential for productivity. You should consider ergonomics and adjustability if you are looking for an office chair or desk. You may want to buy an extra monitor or stand-up desk if your laptop screen is too small. Ergonomic design and comfort are also very important for office furniture.

Workstations are not typically built into counters, so you should check the strength of these surfaces before buying them. However, counters often have a back edge that can be reinforced with wires or shelves. Workstations may also be designed with drawers or cutouts to accommodate computers and other technological equipment. When planning to purchase a workstation, measure its height and depth from the floor to ensure it is sturdy enough to support all your equipment.


When purchasing home office furniture, consider ergonomics. Poor ergonomics in a workspace can contribute to musculoskeletal issues that can lead to problems in the future. On the other hand, having a proper workspace will promote better mental awareness and reduce muscle tension. Ergonomics is important for your home office furniture, but you should also check the dimensions and the shape of your desk before buying it. 

Seat cushions and chairs are essential for ergonomics in your home office furniture. A seat cushion can help alleviate strain on your lower back and pelvis by moving your pelvis forward. The seat can also support the normal lumbar curve of your brain. Using an ergonomic chair is easy and inexpensive, and it’s worth considering if you’re considering purchasing a home office chair.

Psychology of color

The power of color can change how you feel and perceive the space around you. Color psychology is also used in the workplace, as a dark, dull office can make you feel down and unmotivated. Different colors evoke different emotions, including comfort, energizing, or calming. Consider the psychology of color when purchasing home office furniture. The right color scheme can improve your overall productivity.

Blue: The most powerful hue in the color psychology spectrum, blue conveys a sense of confidence. Lighter shades of blue can be soothing and are excellent for a children’s room. While blue is often associated with success and security, it can also convey a sense of stability. Consider blue for your brainstorming areas, as it aids intuition and stability. It also helps you focus on details. If you’re unsure what color will work best for your home office, consider a mix of shades of color to create a stylish workspace that suits your needs.


If you’re on a tight budget, consider commandeering an old folding table from the garage and a thrift store desk for a cheap home office desk. Whether you’re working from home or in a professional workspace, finding the right home office furniture to match your style and functional needs is important. Although a large metal desk may fit your budget, consider whether it will match your wood accents. A home office desk must be comfortable, functional, and professional. To ensure your space looks professional, stick to your budget and use common sense. 

Ways to Mitigate Heavy Snowfall on Your Roof

If heavy snowfall falls on your roof, the following tips can help you protect your roof from the cold. If you live in an area with cold winters, you may want to get a roof snow alarm system, attic insulation, and a roof rake. HIRD de-icing cables are also available for your roof. However, they need professional engineers who should only use them.

Snow Roof Alarms

An SRS roof snow alarm system will monitor the weight of the snow on the roof, alerting you when it needs to be removed. These structural monitoring systems have real-time capabilities that empower snow removal managers, saving them time and money. It can also prevent snow damage. An SRS roof snow alarm system can help minimize costs and injuries associated with snow removal. 

Attic insulation

When heavy snowfall falls on a roof, attic insulation can make it easier for the snow to melt. This is because The snow has insulating qualities, and it warms up the roof’s underside. This is important because the snow will inevitably freeze and form an ice dam when the temperature drops too low. The ice dams are most likely to occur after a snowfall is heavy.

If your attic is poorly insulated, it can cause the heat loss and heat gain in the winter and summer. If your home is located in a temperate climate, such as Central Pennsylvania, you should install the minimum amount of insulation recommended by Energy Star. That’s the equivalent of 16″ to 20″ of blown-in insulation. You should also seal cracks around any pipes and other components.

To minimize ice dams, add insulation to the attic. In addition to preventing snow from accumulating, insulation also reduces the risk of ice dams. Ice dams form when heavy snow is on the roof, and the outside temperature is low enough for the air to freeze. This can result in costly repairs. Also, you should not install large mechanical equipment in your attic in cold climates, such as water heaters, because they increase the temperature.

Roof rake

Using a roof rake is a must when you experience heavy snowfall on your roof. A rake is necessary for removing heavy snowfall and preventing ice dams from forming in your gutter system. It’s also an excellent way to ensure that you don’t have to climb up onto your roof to clear snow and ice. And while you’re at it, you might as well buy extra extension poles to ensure that you never run out.

While it may seem daunting, it’s important to remember that a properly functioning roof minimizes the risk of a cave-in or ice dam. Using salt products on your top could result in discolored shingles and dead plants. Heat cables can also fail within a year. A roof rake will do the trick in a pinch!

While a rake won’t remove heavy snow from your roof, it can help you keep ice dams at bay. These dams can form when melting snow drips onto the cold eaves of the roof. As these dams form, they prevent further melt-off, creating a pool of water that can damage your home. The best way to avoid ice dams is to keep snow from piling up at the roof’s edges. Roof rakes are the easiest and safest way to do this.

Heat it HIRD de-icing cable

A de-icing cable is essential for dealing with heavy snowfall, and Heat has various de-icing cables on the market. Choose the right one for your home and roof by using a calculator. De-icing wires can range from 20 to 200 feet, so choose the right one for your roof. Several features are essential to consider when selecting a cable, including the length, thickness, and weight.

This de-icing cable has two parts: a heated portion and a cold lead. The heated piece of the cable maintains a constant temperature that melts snow in as little as 10 minutes. The hard lead plugs into an outlet, and the cable is several inches long. This cable can also be equipped with a moisture sensor to ensure that the heat not only directs heat to the roof but is also effective in melting ice dams.

The Heat it HIRD de-icing cables are thermostat-controlled and can prevent ice from building up on your roof. They come in a kit with a thermostat, control box, and hardware for easy installation. To install the cables, remove the snow from the roof before attempting installation. Once installed, be sure to install the cable in a zigzag pattern so that the unheated part of the roof is at the bottom, about three feet over the overhang.

Why Is Contractor License Important?

When you’re hiring a contractor, why is a contractor license essential? If you’re not sure why it’s important, consider this: you’re taking a risk if you don’t have one. Unlicensed contractors often lack knowledge of license requirements and may not be concerned about the risks. But if you’re not licensed, you may find yourself a victim of a misdemeanor.

An unlicensed contractor may file a claim against their employer.

A homeowner can file a claim against their employer for injuries from an unlicensed contractor. Because they lack liability insurance, unlicensed contractors often do not carry workers’ compensation or liability insurance. Because they are not required to have these insurance policies, you should only hire a licensed contractor for your project. A licensed contractor also carries worker’s compensation insurance. This will protect you if the contractor fails to meet safety standards.

A not licensed contractor may be held liable for injuries caused by the work of unlicensed contractors. California law requires unlicensed contractors to pay workers minimum wage, overtime, and other compensation based on the nature of their work. If the contractor does not pay their employees a living wage, they may be forced to pay their employees attorney fees and medical bills. This can cost thousands of dollars.

An unlicensed contractor is a victim of a crime.

Hiring an unlicensed contractor may not be the first time you’ve dealt with an evil person. But it can be especially problematic when this person doesn’t have the proper education and insurance. Despite their lack of experience, unlicensed contractors often disappear after taking your money and failing to complete the job. You may also come across unsavory people who have a criminal past, including fraud, theft, and other violent and sexual crimes.

Unfortunately, there are many scams in the construction industry. Con artists pose as contractors and prey on the vulnerable and needy. Consumer protection investigators contact these contractors and often discover that they rob homeowners of thousands of dollars. Despite repeated communications with the Attorney General’s office, unlicensed contractors refuse their customers’ requests. Ultimately, you’re the victim of a crime.

An unlicensed contractor may file a lawsuit.

Suppose you are unhappy with a project that an unlicensed contractor has performed. In that case, you can file a lawsuit against the contractor to recover the damages—several types of cases, including breach of contract, construction defect, and civil theft. Depending on the circumstances, you may be able to collect damages and attorney’s fees. However, if you have not yet paid the contractor, you may have to file a lawsuit yourself.

While hiring a licensed contractor has many benefits, you should be wary of unlicensed workers. An unlicensed worker can sue you for causing injuries or damages to third parties. This may seem tempting, but the risks you face are far greater than the savings you might enjoy. Make sure you take the time to research each contractor before making a decision. This way, you will know what to expect from your new contractor.

An unlicensed contractor may be found guilty of a misdemeanor.

While most contractors are protected by the license, some work without it; contracting without a license is considered a misdemeanor and may result in a fine and jail time. In some states, the penalties for unlicensed contractors are significantly less severe. In Maryland, a contractor guilty of unlicensed work may be fined up to $1,000 and sentenced to 30 days in jail. However, repeat offenders may also be sentenced to up to five years in jail. Additionally, court-ordered restitution can also result.

BP 7028 describes the definition of a contractor. Under this code, a contractor can be a builder, construction worker, home improvement expert, or any other occupation that is similar to a contractor. It is illegal to operate as an unlicensed contractor unless you are licensed to do so in your state. The statute of limitations on contracting without a license is three years.

Licensure protects contractors

A license protects the customer by ensuring that the contractor is qualified and on the up. It also ensures that the contractor is up to date with laws and regulations and must renew their license periodically through the contractor’s state license board. A license is also beneficial in protecting lien rights, as some states don’t allow unlicensed contractors to claim liens. Here are some reasons why you should consider getting a license:

If you’re in the business of building things, it’s essential to get licensed as a general contractor. A general contractor license is enough to do most work, but you should have a specialty license if you perform certain services. Specialty contractors must have their permits and specializations. A general contractor license does not cover the specialty trades, such as roofing or solar. However, specialty licenses are required to do electrical work, masonry, mechanical contracting, sheet metal, and solar. If you’re not sure if your contractor is licensed, you can check with your state’s Department of Consumer Protection.

The Extraordinary Origins of Everyday Things

When you think of the oldest inventions, one of the first things to come to mind is the wheel. A wheel is a piece of simple machinery; in the beginning, it was simply a circle of wood with a hole in the center so it could spin around an axel. Although we are not sure of the exact time and place it was invented, its origin can be traced to the Mesopotamian civilization, in about 3500 B.C., when it was used as a tool to make pottery.

Although wheels seem simple and ordinary, their invention marked a monumental change in ground transportation and the world economy.

The Importance of Wheels

From caster wheels to automobile tires, the way people moved things and got around has been affected by the invention of such a simple tool. For thousands of years, nomad civilizations could only migrate from place to place by walking. The invention of the wheel allowed them and others around the world to cover more distance in smaller increments of time, and they could go to new territories closer to the sea or with more animals to hunt.

Economically, the wheel allowed humanity to develop activities that before were hard to do or took a lot of time, like plowing the earth, moving goods for trade, etc. So, the wheel helped shorten production times and increase efficiency little by little.

The Benefits of New Technologies

From the rudimentary circles of wood used to make pottery in 3500 B.C. to modern times, technology surrounding wheels has improved enormously, allowing us to develop wheels made with different materials such as metal, plastic, rubber, and thermoplastic, among others. Wheels also come in all sizes – from toy cars to massive tires for industrial equipment. 

And, if you haven’t ever thought of it, wheels are literally everywhere. In fact, they’re so widespread and generally used that we don’t even acknowledge their existence or their importance in our everyday lives. Can you imagine a car without a tire? Toys without wheels? Or going to the supermarket and buying a ton of groceries without having a shopping cart with caster wheels? What would it be like for first responders and nurses if ambulance gurneys or hospital beds didn’t have wheels?

It’s quite the thought to think that today, just as in ancient times, an invention simple as the wheel makes working, moving, transporting and traveling that much easier.

Get the Most Out Of Your New Handgun With These Helpful Safety Tips

Anyone who decides to exercise his or her right to bear firearms should understand the commitment that comes along with such liberties. For that reason, responsible gun owners are expected to follow a series of vital safety steps that will help keep themselves and those around them free from unintended consequences. If you or someone you know is thinking about buying a new gun, here are a few things to remember.

Find the Right Way To Carry

There are two primary ways that people typically carry a firearm in public. Many people choose so-called concealed carry, which allows them to transport a gun so that it is not immediately obvious to others. In some places, open carry is a more popular option. By using this method, the gun is typically housed in Desantis holsters or similar apparatuses made by other brands. This allows people to see if a person is armed, though holsters can be worn in different areas of the body. Many gun owners choose to keep their devices on their hip, though the ankle and chest are two other common places. Whether choosing open or concealed carry, it is vital to have a sufficiently secure device to keep the gun in when it is not being used. Simply tucking a weapon into a waistband or sticking it in a pocket can result in accidental discharges and possible injury to the owner or others. 

Choose the Best Storage Option

In order to prevent unauthorized individuals from accessing a firearm when it is being stored, most people choose to keep the weapon securely locked in a safe. There are several popular options available that will provide easy access to those who are supposed to be able to gain entry. Decide whether it would make more sense to have a wall safe or one mounted to the floor and find the right size for the type and size of the guns being stored.

Focus On the Proper Methods

Shooting accurately and safely requires plenty of practice. Fortunately, shooting ranges and other dedicated spaces in communities around the world give people a place to fire their weapons at targets without the risks associated with shooting in public. There are also opportunities to learn tips and tricks from experts, which can make gun owners even more proficient in their craft.

No matter what reason a person has for carrying a weapon, the steps outlined above can help make everyone involved a bit safer.

How to Become Forklift Certified

People used to think forklift operators were on a fast track to an early grave. Forklifts are powerful machines, and they can be dangerous if not used properly. But on-site training and certification have changed all that. Now, an on-site forklift operator is the most popular job in America.

What is a Forklift

Forklifts are powerful machines that are used to move heavy objects. They are commonly found in warehouses and factories, but can also be used in construction sites and other places where large objects need to be moved.

Getting Certified

To become a certified forklift operator, you will need to complete a training course and pass a written exam. The onsite forklift training and certification CA course will teach you how to safely operate a forklift, and the written exam will test your knowledge of forklift safety.

Benefits of Certification

There are many benefits to being certified as a forklift operator. First, it will make you more employable. Many employers prefer to hire forklift operators who are certified, as it shows that you have the necessary skills and knowledge to safely operate a forklift.

Second, being certified as a forklift operator can help you earn more money. Certified forklift operators typically earn higher wages than those who are not certified.

Third, being certified as a forklift operator can help you stay safe on the job. Forklifts are powerful machines, and they can be dangerous if not used properly. By completing a training course and passing a written exam, you will learn how to safely operate a forklift and avoid accidents.

Once you have completed a certified forklift training course and passed the written exam, you will be able to apply for jobs as a certified forklift operator. With your new skills and certification, you will be able to earn higher wages and stay safe on the job.

5 Benefits of Physiotherapy You May Not Know About

You’re in pain and don’t know where to turn. It’s hard to know who to trust when it comes to your health. There are so many conflicting opinions and treatments available, that it’s tough to figure out what will help you feel better.

Physiotherapy is a physical therapy, which aims to assess and improve movement and reduce pain. It is a safe and effective treatment for a variety of conditions. It’s also focused on education. In general, it helps with health problems that are related to muscle, nerve or joint dysfunction.

Physiotherapists are highly trained professionals who will work with you one-on-one to develop a treatment plan that meets your specific needs. They can offer a range of services including physiotherapy, massage therapy, acupuncture, and more. Here are five benefits of physiotherapy you may not know about! 

1. Improves Functionality

Physiotherapy Burlington ON helps improve functionality by assessing and improving movement. This can impact the quality of life for those with chronic conditions, such as arthritis. For example, physiotherapy can help a person with arthritis to maintain their range of motion and improve their overall mobility.

2. Reduces Pain

Physiotherapy is also effective in reducing pain. It does this by helping to increase blood flow to the area, which reduces inflammation. This can be beneficial for those who suffer from conditions like migraines or tension headaches. In addition, physiotherapy can help to release endorphins, which are natural painkillers.

3. Prevents Injuries

Physiotherapy can also help to prevent injuries. This is because it helps to strengthen the muscles and improve flexibility. This can reduce the risk of strains and sprains. In addition, physiotherapy can help to improve balance and coordination, which can help to prevent falls.

4. Improves Recovery Time

Physiotherapy can also help to improve recovery time. This is because it helps to increase blood flow and reduce inflammation. This can speed up the healing process and help you to get back to your normal activities sooner.

5. Improves Quality of Life

Finally, physiotherapy can also improve the quality of life. This is because it can help to reduce pain, improve functionality, and prevent injuries. All of these things can help you to live a fuller and more active life.

If you’re looking for a safe and effective treatment for a variety of conditions, physiotherapy may be right for you. It’s also focused on education and can help to improve the quality of life. To learn more, contact a physiotherapist today!

3 Simple Ways to Alleviate Ear Pain

If you’re experiencing ear pain, it can be more than just a minor distraction. This type of discomfort can make it difficult to focus at work, perform everyday tasks and even sleep well at night. Many times, it may be necessary to visit an ear specialist Farmington NM for evaluation. While you’re waiting for your appointment, here are three simple things you can do to help alleviate the pain.

Try Some Pain-Relieving Medication

If your earache is severe, taking some meds can help. You can try acetaminophen to block your brain’s pain receptors and give you some much-needed relief. Ibuprofen can also be helpful, especially if swelling is the source of your ear discomfort. Some over-the-counter ear drops can be useful, depending on the underlying cause. Be sure to follow the instructions for dosage amount and frequency. 

Alternate Between Hot and Cold Compresses

Both heat and cold can alleviate throbbing pain in your ear. Alternate between using a heating pad or warm damp cloth and then an ice pack every 10 minutes. For some, the combination of heat and cold can work wonders, while others may find that only one method is helpful.

Keep Your Head Elevated

Laying your head down when you have an earache can actually make the pain worse. If you need to rest, prop yourself up with plenty of pillows and try to avoid laying on the affected side. If you can’t sleep, try to distract yourself from the discomfort by reading a good book or watching your favorite show.

It’s always wise to talk to a doctor about ear pain, especially if it’s sudden, persistent or severe. It’s also critical to see a health care professional right away if your symptoms are accompanied by a fever, which could be a sign of an infection. In the meantime, these simple tips can help keep you comfortable until your doctor recommends a different type of treatment.