Keeping your pool in top shape doesn’t have to be a daunting task. It can be a fun, rewarding hobby and an excellent way to spend time with family and friends.
However, it does require weekly or monthly maintenance and swimming pool repairs St Louis county MO, to keep it in tip-top shape. Those tasks include detailed cleaning, monitoring, and chemical checks.
Pump
The pump is a complex machinery that circulates and filters the pool water. This is a critical part of swimming pool maintenance and repairs, and a faulty pump can cause serious damage to your water and health.
A pump consists of an electric motor and a hydraulic “wet end” that converts electrical power into mechanical movement. The motor has a stator winding that produces an alternating magnetic current and a rotor winding that creates torque and rotates the motor shaft.
Inside the motor is a bearing that allows the motor shaft to spin smoothly in the correct position, and it is also protected by a sleeve. If the bearing becomes damaged, it can cause decreased flow rate, an overheated pump, or an electrical problem.
A good way to prevent a broken pump is by installing a timer that will run the pump for 8 to 12 hours daily. This will help to keep the water clean and reduce your electricity bill.
Filter
The filter is a key component in keeping your swimming pool water clear. A dirty or clogged filter can cause murky water and malfunction the equipment.
Most pool filters use sand, cartridge, or diatomaceous earth to filter debris from the water. They also have a pressure gauge mounted on them to monitor the pressure.
When the pressure rises eight psi above normal, it’s time to clean or replace the filter.
Cartridge filters have pleated polyester filter media in a tank that traps debris as small as 10 microns and cleans water back into the pool. These are more energy efficient and easier to maintain than sand filters.
Heater
A pool heater is necessary to keep your swimming pool water warm and comfortable. It heats the pool using a gas, electric, or solar pump.
When your pool heater isn’t working properly, it can cause major issues for you and your family. It may not produce enough heat, or it might even be leaking.
There are a few things that you can do to ensure that your heater is in good condition. First, ensure the area around it is clean and free of dirt, leaves, and twigs.
Second, check to see if the flame sensor is working properly. If the flame sensor is corroded or dirty, it can interfere with the ignition process and cause your heater to shut off.
You can also try occasionally cleaning the element with a brush, which is a great way to keep your pool heater running smoothly. If these steps don’t solve the problem, you might need to call a professional to help repair or replace the unit.
Chemicals
Pool chemicals keep your pool water clean, safe, and healthy for swimming. They help keep the pH and alkalinity levels at the right level to prevent bacteria and algae from growing.
They can also prevent metal stains from appearing on the pool’s surface. These stains can be caused by iron and copper, which can be found in the water.
These stains can be removed with stain and scale removers, which work by breaking down the dissolved minerals that cause them to form. These dissolved minerals are the main food source for algae, so keeping a stain and scale remover on hand is essential to keep your pool water clean and clear!
These chemicals also help to fight off and remove organic stains, such as pink slime. They can be combined with chlorine or as a stand-alone product.